Anasayfa      |      Tarihçe      |      Vizyon      |      Misyon      |      Teknik Servis      |      İletişim
     Cumartesi, 24 Ağustos 2019
Convertech DAY
Ferag Flint Group
Folex KBA
Kodak 3M
Perfecta Praxair
Recyl D.W. Renzmann
Rogers Rotec
Techkon Q. I. Press Control
dayGraphica X-Treme HS

Plastic pot printing blanket

During the last 30 years production and decoration of plastic containers has advanced dramatically with faster production and a much higher expectation in terms of print quality. To meet these demands, Flint Group’s pressroom consumables division, Day International, have thoroughly re-evaluated the product requirement and as a result have developed a totally new surface compound that out performs the existing butyl blankets traditionally used for this specialist application.

The surface of dayGraphica X-treme HS offers superior resistance to both keytone based and UV curable inks, giving longer blanket life and consistent print performance. The face also features enhanced abrasion resistance, allowing conical containers to be printed with maximum scuff resistance. The face compound on both 1.70mm and 1.30mm versions provides high ink transfer properties, which in turn ensures excellent half tone and solid print on all types of plastic containers. The 1.30mm version is used primarily for the pail market, which normally has a target gauge when combining top and underlay blankets of 3.55mm. Both 1.30mm and 1.70mm blankets provide you with the ability to reach various blanket heights depending on press type and application. dayGraphica X-Treme HS has been specifically designed for use in conjunction with dayGraphica Red Matrix 920, a unique compressible underlay.

Abrasion resistant surface.Ideal surface for carrying and transferring ink onto conical
shaped containers without surface wear, giving longer
blanket life and eliminating blanket debris in the print area.
Designed run at speeds of 350-700p.p.m. Abrasion
resistant to injection moulded and thermoformed plastics.
Cast coated surface.High quality halftone reproduction and uniform ink lay down in solid print areas.
UV compatible rubber
surface compound.
Virtually no swelling with either UV curing or solvent-based inks.


Colour: Tan
Surface: Cast
Thickness: 1.70mm, 1.30mm
Hardness: 80° Shore A
Compressibility: 0.08mm @ 1060 kpa Typical
                          0.10mm @ 2060 kpa Typical
Elongation: <0.70% @ 10 N/mm
Tensile Strength: >60 N/mm
Face Compound: Solvent resistant rubber blend

Optimise your on-press performanceOver the years, Day’s printing technologists and pressroom chemists have learned the dynamics between printing blankets and pressroom chemicals play a vital role in on-press performance and profitability. And they’ve learned how to analyse these dynamics to help printers resolve problems and optimise their printing results.

Day’s laboratory experts, technical support team and sales consultants work together with printers to recommend the right combination of pressroom chemicals and printing blankets to achieve optimum performance. A consultative service offered only by Day International.


Üretici firma:
( v.3.5.75 ) Copyright © 2019 Dereli Graphic A.Ş. All Rights Reserved. | Bu siteyi kullanmanız; kullanım şartlarını kabul ettiğiniz anlamına gelir.